| dc.contributor.author | SUDARISMAN, SUDARISMAN | |
| dc.contributor.author | DAVIES, IAN J. | |
| dc.date.accessioned | 2017-07-20T22:25:13Z | |
| dc.date.available | 2017-07-20T22:25:13Z | |
| dc.date.issued | 2008 | |
| dc.identifier.citation | Sudarisman and Davies, I.J. 2008. The effect of processing parameters on the flexural properties of undirectional carbon fibre-reinforced polymer (CFRP) composites. Mater Sci Eng A, 498: 65-68 | en_US |
| dc.identifier.issn | 0921-5093 | |
| dc.identifier.uri | http://repository.umy.ac.id/handle/123456789/11633 | |
| dc.description | This paper deals with the effect of epoxy concentration, the applied compressive presure and holding time on the flexural strength, modulus and fiber content of the resulted composite plates. | en_US |
| dc.description.abstract | The flexural properties (e.g., strength, elastic modulus) of unidirectional carbon fibre-reinforced polymer matrix composites were optimised by controlling the following processing parameters during Manufacture: (i) concentration of epoxy (45–65 wt.%) within an acetone solution for wetting the carbon fibres, (ii) compressive pressure (0.25–1.25 MPa), and (iii) holding time (20–40 min) applied during vacuum autoclave curing at 120 ◦C. Flexural properties of the resulting composites were evaluated using the three-point bend configuration in accordance with the ASTM D790-03 standard. Overall it was concluded that optimum flexural properties (e.g., 1292 MPa flexural strength) were achieved using a 50 wt.% epoxy solution, 1.0 MPa compressive pressure, and 30 min holding time during vacuum autoclave curing. | en_US |
| dc.language.iso | en | en_US |
| dc.publisher | ELSEVIER | en_US |
| dc.subject | Composite | en_US |
| dc.subject | CFRP | en_US |
| dc.subject | Carbon fibre | en_US |
| dc.subject | Processing Conditions | en_US |
| dc.subject | Flexural properties | en_US |
| dc.subject | Mechanical | en_US |
| dc.title | THE EFFECT OF PROCESSING PARAMETERS ON THE FLEXURAL PROPERTIES OF UNIDIRECTIONAL CARBON FIBRE-REINFORCED POLYMER (CFRP) COMPOSITES | en_US |
| dc.type | Article | en_US |
