| dc.contributor.advisor | WIDADI,SIGIT | |
| dc.contributor.advisor | RAHMASARI,DESY | |
| dc.contributor.author | OPRASENA, ADHITYA | |
| dc.date.accessioned | 2017-10-05T02:57:11Z | |
| dc.date.available | 2017-10-05T02:57:11Z | |
| dc.date.issued | 2017-08-30 | |
| dc.identifier.uri | http://repository.umy.ac.id/handle/123456789/15411 | |
| dc.description | Sphygmomanometer calibrator is tool to test the level precision with the standard blood pressure value measurement in sphygmomanometer. Measurement and readings the examination should done appropriately, this is because the results will concerning the patients health and safety. So, calibration is necessary to determine the truth of sphygmomanometer by comparing the measuring standard. Sphygmomanometer calibration can do with Digital Pressure Meter (DPM). In calibration the environmentak conditons should be set according to the calibration method such as temperature and humidity. Temperature that be allowed is about 200C with 60-70% humidity level, because with that condition the tool will relatively stable.
Measurements made about 6 times on 0, 20, 50, 100, 120, 150, 200, 200, 250 mmHg measurements points , and every 3 minutes to know the influence of temperature and humadity. The measurements result may be afferted by environmental conditions and measurement errors. DPM success that be equipped of temperature monitoring and humadity that measures based on the deviation value of the standard test calibrator tool. | en_US |
| dc.description.abstract | Kalibrator tensimeter merupakan alat untuk menguji tingkat presisi dengan nilai standar pengukuruan tekanan darah pada tensimeter. Pengukuran dan pembacaan tekanan darah harus dilakukan dengan tepat karena karena menyangkut kesehatan dan keselamatan pasien sehingga perlu dilakukan kalibrasi untuk menentukan nilai kebenaran tensimeter dengan membandingkan terhadap standar ukur. Kalibrasi tensimeter dapat dilakukan menggunakan Digital Pressure Meter (DPM). Pada saat proses kalibrasi kondisi lingkungan harus diatur sesuai persyaratan metode kalibrasi seperti suhu dan kelembaban. Suhu yang diizinkan adalah 200C dengan tingkat kelembaban sekitar 60-70%, karena pada kondisi tersebut alat ukur relatif stabil.
Pengujian tensimeter dilakukan 6 kali pada titik pengukuran 0, 20, 50, 100, 120, 150, 200, 250 mmHg dan setiap 3 menit untuk mengetahui pengaruh suhu dan kelembaban. Hasil pengujian bisa dipengaruhi oleh kondisi lingkungan dan kesalahan prosedur pengujian. Keberhasilan Digital Pressure Meter yang dilengkapi monitoring suhu dan kelembaban diukur berdasarkan nilai simpangan terhadap alat kalibrator standar yang diuji. | en_US |
| dc.publisher | D3 UMY | en_US |
| dc.subject | Tensimeter, Digital Pressure Meter, Kalibrator. Sphygmomanometer, Digital Pressure Meter, Calibrators | en_US |
| dc.title | DIGITAL PRESSURE METER SPHYGMOMANOMETER DILENGKAPI SENSOR HSM-20G BERBABIS MICROCONTROLLER ATMEGA8 | en_US |
| dc.type | Thesis
T A
VOKASI
081 | en_US |
