Search
Now showing items 1-8 of 8
COMPRESSIVE FAILURE OF UNIDIRECTIONAL HYBRID FIBRE-REINFORCED EPOXY COMPOSITES CONTAINING CARBON AND SILICON CARBIDE FIBRES
(ELSEVIER, 2007)
The compressive failure of unidirectional hybrid fibre-reinforced epoxy matrix composites containing carbon (C) and silicon carbide (SiC) fibres has been investigated. In contrast to the case of flexural testing previously ...
THE EFFECT OF PROCESSING PARAMETERS ON THE FLEXURAL PROPERTIES OF UNIDIRECTIONAL CARBON FIBRE-REINFORCED POLYMER (CFRP) COMPOSITES
(ELSEVIER, 2008)
The flexural properties (e.g., strength, elastic modulus) of unidirectional carbon fibre-reinforced polymer matrix composites were optimised by controlling the following processing parameters during Manufacture: (i) ...
SIFAT-SIFAT KEKUATAN TARIK PMC DENGAN KANDUNGAN SERAT ALAMI
(Lembaga Penelitian ISTA Yogyakarta, 2006-02)
This study deals with the utilization of natural local fibers as reinforcing materials of polymer matrix composite (PMC), epoxy matrix composites. The objectives are (1) to compare the strength of four different fibers/epoxy ...
PENGARUH BENTUK KAMPUH TERHADAP KUALITAS DEPOSIT DAN EFISIENSI SAMBUNGAN LAS BUSUR PADA BAHAN ST 37
(FT UMY, 2002)
The objective of this research is to investigate the effect of welding grove grove type on the quality of welding deposit and joint efficiency. I and V groves, and thickness of 5, 8.5 and 11 mm were chosen due to common ...
ANALISIS REGANGAN DUA DIMENSI DENGAN PENGUKURAN MENGGUNAKAN STRAIN GAGE ROSETTE TIGA ELEMEN
(FT UMY, 2002)
The purpose of this study is to find out the relation between the magnitude of load in one hand and the magnitude of principal strains and maximum shear shear strain on the other hand. The specimen was made of aluminum ...
POLA REGANGAN DINAMIS PADA BALOK KANTILEVER AKIBAT GETARAN BERFREKUENSI RENDAH
(FT UMY, 2003-05)
The purpose of this study is to find out the relation between the magnitude of load in one hand,and natural frequency, strain pattern and decay rate of dynamic strain due to low frequency vibration along a cantilevered ...
THE EFFECT OF PARTIAL SUBSTITUTION OF E-GLASS FIBRE FOR CARBON FIBRE ON THE MECHANICAL PROPERTIES OF CFRP COMPOSITES
(ITS, Surabaya, 2009-06-24)
The present investigation was concerned with the improvement of flexural properties of carbon fibre-reinforced polymer (CFRP) composites through partial substitution of E-glass fibre (SE 2350 Type 30) for carbon fibre ...
FAILURE MECHANISM OF UNIDIRECTIONAL HYBRID FRP COMPOSITES CONTAINING CARBON AND E-GLASS FIBRES SUBJECTED TO THREE-POINT BEND LOADING
(ITS Surabaya, 2009-06-24)
Unidirectional hybrid FRP composites containing moderate strength carbon fibre (CF) and E-glass fibre (GF) arranged in different stacking configurations and hybrid rations, i.e. rh = VfG/VfC were produced, tested and ...