Search
Now showing items 1-5 of 5
OPTIMALISASI SINK MARK INDEX PADA PRODUK PLASTIK DENGAN VARIASI KETEBALAN EKSTRIM MENGGUNAKAN SIMULASI MOLDFLOW
(Semesta Teknika, 2016-11-02)
Injection Molding Process is a closed cycle process involving 4 important factors that influencing product quality such as: process setting parameter, plastic material selection, product design and mold design. Ideally a ...
THE INFLUENCE OF NANO FILLER ON THE THERMAL AND MECHANICAL PROPERTIES OF PP
(Faculty of Engineering Universitas Indonesia, 2017-07-25)
In order to obtain specific properties in the commercial and engineering applications, PP
materials are often combined with additives. Filler is one of solid additive type that made of
inorganic materials and is generally ...
EFFECT OF BALL-MILLING TREATMENT ON MICROSTRUCTURE OF IN SITU POWDER-IN-TUBE (PIT) MGB2 TAPE
(American Institute of Physics (AIP), 2012-06-25)
In an in situ powder-in-tube (PIT) fabrication of MgB2 superconducting tapes, it has been found that ball-milling treatment on a starting powder is effective for improving critical current density (Jc) of the MgB2 tapes. ...
TEM AND SEM ANALYSIS FOR FORMATION MECHANISM OF TIN WHISKERS
(Trans Tech Publications, 2012-07-09)
Close observation with a transmission electron microscope (TEM) and a scanning electron
microscope (SEM) was performed for the growth process of tin (Sn) whiskers on lead (Pb)-free
Sn-plating. Whiskers were formed on a ...
RELATIONSHIPS BETWEEN TENSILE STRENGTH, MORPHOLOGY AND CRYSTALLINITY OF TREATED KENAF BAST FIBERS
(American Institute of Physics (AIP), 2013-09-09)
Surface treatments on kenaf bast fibers were carried out with steam, alkali and a combination of steam-alkali. To verify and gain an understanding of their inter-relationship, tensile strength, surface morphology and ...