Search
Now showing items 1-10 of 10
MICROSTRUCTURES OF MGB2 /FE TAPES FABRICATED BY AN IN SITU POWDER-IN-TUBE METHOD USING MGH2 AS A PRECURSOR POWDER
(IOP, 2006-01-04)
Microstructures of MgB2/Fe tapes fabricated by an in situ powder-in-tube method using MgH2 as a precursor powder have been studied by means of x-ray diffraction and analytical transmission electron microscopy combined with ...
CHANGES IN MICROSTRUCTURE OF AL/ALN INTERFACE DURING THERMAL CYCLING
(The Japan Institute of Metals and Materials, 2008-12-01)
Changes in the microstructure of the interface between an Al layer and an AlN plate during thermal cycling was studied to clarify the fracture mechanism of the Al/AlN interface. Observation of the interface with an ultra-sonic ...
RELATIONSHIP BETWEEN MICROSTRUCTURE AND JC PROPERTY IN MGB2/Α-AL2O3 FILM FABRICATED BY IN SITU ELECTRON BEAM EVAPORATION
(IOP, 2005-08-09)
A transmission electron microscopy (TEM) study has been carried out on an MgB2/α-Al2O3 film that exhibits the typical property of critical current density (Jc) under magnetic fields. The MgB2 layer of 300 nm in thickness ...
EFFECTS OF HEAT TREATMENTS ON MICROSTRUCTURE FORMATION IN MGB 2 /YSZ/HASTELLOY FILM
(2005-06)
Annealing processes in MgB2 films deposited on yttria-stabilized zirconia (YSZ)-buffered Hastelloy substrates were studied by transmission electron microscopy. The MgB2 films with Mg-rich compositions were fabricated at room ...
MgB fiLMS WITH VERY HIGH CRITICAL CURRENT DENSITIES DUE TO STRONG GRAIN BOUNDARY PINNING
(American Institute of Physics, 2004-08-13)
MgB2 superconductor has a great potential for applications because of its high Tc and Bc2, exceeding those of any Nb-base superconductors at any temperature. It is now important to understand its flux pinning so as to raise ...
PROPERTIES OF MGB FILMS WITH VERY HIGH TRANSPORT CRITICAL CURRENT DENSITIES
(IEEE, 2005-06)
Magnesium diboride, MgB2, thin films are fabricated through two different kinds of process. One is an in-situ process by using electron beam deposition and the other is an ex-situ process by using the combination of pulsed ...
TRANSMISSION ELECTRON MICROSCOPY ANALYSIS OF C4H4S-doped MgB2 TAPES
(IOP, 2008)
It has been reported that doping with aromatic hydrocarbons in an in situ powder-intube
fabrication process of MgB2 tapes is effective for increasing the critical current density (Jc) under magnetic fields. In this study, ...
FABRICATION OF MULTILAYERED MGB2/NI THIN FILMS AND THEIR FLUX PINNING PROPERTIES
(IEEE, 2009)
We prepared the multilayered MgB2/Ni thin films with the Ni layer spacings of 32, 23 and 16 nm. The
multilayer nanostructure was confirmed to be obtained from the scanning transmission electron microscope observation. The ...
REMOVING FOCUSED ION-BEAM DAMAGES ON TRANSMISSION ELECTRON MICROSCOPY SPECIMENS BY USING A PLASMA CLEANER
(OXFORD Academic, 2006-03-01)
A plasma cleaner is usually used for removing carbonaceous debris from a specimen and preventing contamination during transmission electron microscopy (TEM) imaging and analysis. However, the plasma cleaner can be effectively ...
MBE FABRICATION OF MNX P NANOWHISKERS
(2008)
MnP and MnP nanowhiskers have been grown by molecular-beam epitaxy (MBE)
technique on InP(100) and GaAs(111)B substrates. The catalyst-free growth of nanowhiskers
is found to be depended on the formation of Mn-based ...