Search
Now showing items 1-10 of 22
TWO-PHASE FLOW PATTERN OF AIR-WATER WITH LOW VISCOSITY IN A 5-DEGREE SLOPE OF A CAPILARY PIPE
(Akademia Baru, 2020)
This paper describes a new corresponding between computational and experimental
data of two-phase flow in mini pipe with low viscosity of fluid. Computational Fluid
Dynamics is needed to predict the phenomenon before ...
EXPERIMENTAL INVESTIGATION ON THE LOCAL PROFILES OF HEAT TRANSFER COEFFICIENT DURING THE STEAM CONDENSATIION IN A HORIZONTAL ANNULUS PIPE
(2012-04)
The objective of the research is to investigate the heat transfer profiles by using a
measurement of the temperature distributions during condensation in a horizontal annulus pipe.
The circumferential temperature ...
THE INVESTIGATION OF VOID FRACTION OF TWO-PHASE FLOW AIR-WATER AND GLYCERINE (0-30%) IN THE CAPILLARY PIPE WITH SLOPE OF 5° TO HARIZONTAL POSITION
(Mechanical Engineering Dept., Engineering Faculty, Universitas Muhammadiyah Surakarta, 2019)
Two-phase flow is a flow that is composed of two combined substances, i.e., liquid and
gas. Two-phase flow phenomena can be a lot encountered in nature, for example, exhaust
gas smoke, fog, rain, cloud, snow, and so ...
SIMULATION OF HIGH VISCOSITY GAS-LIQUID TWO-PHASE FLOW IN A HORIZONTAL MINI PIPE
(Fakultas Teknik UMY, 2019-11)
Two-phase flow is used in many industries such as nuclear reactors, boilers, condensers, liquefactions of natural gas, etc. Two-phase flow is a flow in a pipe which has two states of fluid such as solid-liquid, liquid-gas, ...
KARAKTERISASI ALIRAN UAP-KONDENSAT PADA SALURAN MENDATAR BERDASARKAN PENGUKURAN TEMPERATUR
(Fakultas Teknik UMY, 2014-05)
The objective of the current investigation is to find out temperature distribution regimes in a horizontal pipe when condensation process is happened. The research was conducted at Pusat Studi Ilmu Teknik Universitas Gadjah ...
STUDI LITERATUR TENTANG PROGRAM PUMP SYSTEM IMPROVEMENT MODELING TOOL UNTUK PENYEMPURNAAN KINERJA SISTEM PUMPA
(Fakultas Teknik UMY, 2017-05)
In the industrial world often encountered actual loads do not match the design load. These differences lead to energy wastage. Pumping system is one of the systems that always exist in the industry. Improving of pumping ...
A VOID FRACTION OF HIGH-VISCOSITY AIR-WATER FLOW IN CAPILLARY PIPES WITH A SLOPE OF 30 DEGREES TO THE HORIZONTAL POSITION
(Universitas Muhammadiyah Metro, 2019-12)
Two-phase flow is a flow that is composed of several combined substances, namely liquid and gas. Two-phase flow is found in industrial processes, such as in boiler systems, reactors, heat exchangers, geothermal and others. ...
ANALISIS UNJUK KERJA BOILER FEED PUMP TURBINE UNTUK KAPASITAS KATEL UAP 2000 TON/JAM DI PLTU CIREBON JAWA BARAT
(Fakultas Teknik UMY, 2015-05)
Boiler feed pump turbine (BFPT) has an important role in the circulating of demin
water from deaerator to the separator of steam power plant operations (PLTU) in
Cirebon. Flow rate, temperature and pressure were important ...
PEMBUATAN ALAT INCINERATOR LIMBAH PADAT MEDIS SKALA KECIL
(Fakultas Teknik UMY, 2017-11)
Trash is one of the major problems in big cities. Trash has negative impact on the environment, because waste can cause environmental pollution, as well as hygiene and health problems. For processing the solid medical ...
PERILAKU ANTARMUKA BERDASARKAN DATA BEDA TEKANAN PADA PERISTIWA KONDENSASI ALIRAN UAP DENGAN PENDINGINAN DARI LUAR SEARAH PADA PIPA HORIZONTAL BERBASIS DOMAIN WAKTU
(Fakultas Teknik UMY, 2018-05)
A two-phase flow pattern experiment on the condensation event of steam flow with external cooling based on the measurement of pressure difference within a horizontal pipe is carried out by varying the superficial velocity. ...