The smartphone currently has many default features for taking photos. One feature that is often used in taking photos using a smartphone is a panoramic photo feature. In taking photos with a panorama feature requires Panning movement, which is a horizontal movement either to the right or left. The problem that usually occurs in taking panoramic photos is that the resulting photo appears blurred because of the shock when taking the photo. To reduce these problems, a design tool is used to assist in taking panoramic photos. This tool is controlled using the Arduino Nano which has been programmed and connected to the A4988 Driver in order to drive the Stepper Motor. The Oled I2C module is used for the display screen and pushbutton as the execution input of the stepper motor drive. This tool has two modes, namely manual mode and automatic mode. The manual mode uses two buttons to move the stepper motor so that it can move panning right and left. In automatic mode it uses three buttons in operation which are used to adjust the movement angle of the stepper motor, adjust the motor rotation direction, and execute. Beyond that there is also a button that functions to change the mode. So that by using this tool in taking panoramic photos the results of the photos are not blurry.