Show simple item record

dc.contributor.advisorSALEH, FADILLAWATY
dc.contributor.authorSANDRA, ALEK
dc.date.accessioned2020-06-04T03:15:57Z
dc.date.available2020-06-04T03:15:57Z
dc.date.issued2020-04-07
dc.identifier.urihttp://repository.umy.ac.id/handle/123456789/34691
dc.descriptionBeton serat merupakan beton normal yang dikembangkan secara khusus dengan menambahkan serat ke dalam campuran beton. Penambahan serat bertujuan untuk mencegah terjadinya retak akibat pembebanan, dan meningkatkan sifat mekanik pada beton, sehingga beton tahan terhadap gaya tekan, gaya tarik dan gaya lentur yang disebabkan oleh faktor cuaca, iklim dan temperatur yang biasanya terjadi pada beton yang memiliki permukaan yang luas. Penelitian ini menggunakan serat pohon pisang yang merupakan serat alami yang diperoleh dari bagian batang pohon pisang . Serat pohon pisang mudah ditemukan dan memiliki nilai yang ekonomis. Penelitian ini bertujuan untuk menganalisis kuat tekan beton serat dengan bahan tambah serat pohon pisang dengan presentase 0 %, 0,8 %, 1,6 %, dan 2,4% dari berat semen. Sedangkan untuk meningkatkan workability dan kuat tekan pada campuran beton serat digunakan superplasticizer jenis sikamentnn dengan sebanyak 1,5 % dari berat air dan silica fume dengan presentase 5% dari berat semen. Pengujian kuat tekan dilakukan pada usia beton 1, 3, 7, dan 28 hari. Berdasarkan hasil pengujian, nilai kuat tekan maksimal dari beton serat diperoleh pada benda uji dengan variasi serat pohon pisang 2,4% dengan nilai kuat tekan sebesar 26,59 MPa .en_US
dc.description.abstractFiber concrete is a normal concrete that is specially developed by adding fiber to the concrete mixture. The addition of fiber aims to prevent the occurrence of cracks due to loading, and improve the mechanical properties of the concrete, so that the concrete is resistant to compressive forces, tensile forces and flexural forces caused by weather, climate and temperature factors that usually occur in concrete that has a wide surface. This study uses banana tree fiber which is a natural fiber obtained from the banana tree trunk. banana tree fiber is easy to find and has economic value. This study aims to analyze the compressive strength of fiber concrete with added ingredients of banana tree fibers with the percentage of 0%, 0.8%, 1.6%, and 2.4% of the amount of cement. Whereas to improve the workability and compressive strength in the fiber concrete mixture a sikament-nn superplasticizer was used with a percentage of 1.5% by amount of water and silica fume with a percentage of 5% by amount of cement. Compressive strength test is performed at the age of 1, 3, 7, and 28 days. Based on the test results, the maximum compressive strength of fiber concrete was obtained in specimens with a variation of banana tree fiber 2.4% with compressive strength is 26,59 MPa and the maximum compressive strength value of concrete without fiber or normal concrete used as a reference or comparison of 28,60 MPaen_US
dc.publisherFAKULTAS TEKNIK UNIVERSITAS MUHAMMADIYAH YOGYAKARTAen_US
dc.subjectfiber concrete, compressive strength, natural fiberen_US
dc.titleKUAT TEKAN BETON SERAT MENGGUNAKAN VARIASI LIMBAH SERAT POHON PISANGen_US
dc.typeThesis SKR FT 472en_US


Files in this item

Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record