| dc.contributor.advisor | NUGROHO, ARIS WIDYO | |
| dc.contributor.advisor | KAMIEL, BERLI PARIPURNA | |
| dc.contributor.author | KURNIAWAN, YUSUF | |
| dc.date.accessioned | 2020-04-06T02:35:29Z | |
| dc.date.available | 2020-04-06T02:35:29Z | |
| dc.date.issued | 2019-05-03 | |
| dc.identifier.uri | http://repository.umy.ac.id/handle/123456789/32686 | |
| dc.description | Kebutuhan energi dari tahun ke tahun mengalami peningkatan seiring dengan pertumbuhan ekonomi dan transportasi di Indonesia. Bahan bakar minyak menjadi sumber energi pokok dibidang transportasi yang sebagian besar disuplai dari energi fosil, sedangkan energi fosil tidak dapat diperbaharui dan cadangannya semakin menipis. Dikarenakan permasalahan sumber energi yang menipis maka Kementrian Ristek Dikti mengadakan event Kontes Mobil Hemat Energi (KMHE) yang berorientasi mahasiswa seluruh Indonesia dengan tujuan untuk merancang, mengembangkan, dan memproduksi kendaraan yang hemat energi dan ramah lingkungan. Berdasarkan permasalahan tersebut maka diproduksi mobil Lingsar Proto 3.
Mobil Lingsar Proto 3 merupakan kendaraan prototype yang dirancang aerodinamis dan penggeraknya menggunakan motor listrik. Proses pembuatan dibagi beberapa tahapan antara lain pembuatan rangka, pembuatan steering system, sistem penggerak, dan bodi. Pada rangka menggunakan tipe ladder frame dengan material alumunium hollow dengan dimensi 40 x 20 x 1,5 mm yang disambung melalui proses pengelasan, sedangkan untuk material bodi menggunakan bahan komposit dengan filler glass fiber dan Lantor Coremat. Pada proses pembuatan bodi menggunakan metode hand lay up.
Hasil pembuatan mobil Lingsar Proto 3 memiliki panjang 267 cm, lebar 84 cm, tinggi 72 cm, sedangkan bobot kendaraan keseluruhan 42 Kg. mobil ini menggunakan motor listrik BLDC (Brushless Direct Curent) 1000 watt dengan baterai jenis Lithium Polimer 12 volt berjumlah 4 yang di rangkai seri menjadi 48 Volt dengan kapasitas 10.000 mAh Mobil ini menggunakan single sprocket dengan jumlah gigi depan dan belakang 24T : 28T dan kecepatan maksimal 35 km/jam. Proses pembuatan membutuhkan waktu 4,5 bulan dengan biaya Rp. 50.322.500. | en_US |
| dc.description.abstract | The necessity of energy is increase from year to year, reward with the growth of the economic and transportation in Indonesia. The fuel has become main of energy sources in the transportation field, which are mainly fossil fuels, meanwhile the energy of the fossil is an unrenewable energy and the reserve of the fossil energy is slowly become rarefy. Due to the rarefy of the energy source’s problem, then The Ministry of Research, Technology and Higher Education conducts a Kontes Mobil Hemat Energi (KMHE) event to be oriented for all the University students in Indonesia with its purpose to design, to develop and to produce a vehicle which is saving more energy and eco-environmental. Based on that matter, a Lingsar Proto 3 car is the great solution for it.
Lingsar Proto 3 car is a prototype car with aerodynamics designed and electric motor for the driving force on it. The making process is devided into several stages, obiter the making of chassis, the making of steering system, the making of driving force system and the making of its body. In the chassis, using a ladder frame type with aluminum hollow material with its dimension 40 x 20 x 1,5 mm to be connected through the welding process, whereas the composite material is using for the body material with adding the filler glass fiber and Lantor Coremat. At the process of the making of the body is applied with hand lay up methode.
The results show that the Lingsar Proto 3 car has length of 267 cm, width of 84 cm and hight of 72 cm, while the whole weight of the car is 42 kg. This car use Brushless Direct Current (BLDC) electric motor of 1000 watt with 4 the Lithium Polimer of battery type of 12 volt for 4 batteries to be installed series connection with its capacity of 10.000 mAh. This car uses a single sprocket with a number of 24T front and rear teeth 28T and a maximum speed of 35 km / hr. The manufacturing process took time about 4,5 months with its costs of Rp 50.322.500. | en_US |
| dc.publisher | FAKULTAS TEKNIK UNIVERSITAS MUHAMMADIYAH YOGYAKARTA | en_US |
| dc.subject | Lingsar proto 3, KMHE, chassis, body | en_US |
| dc.title | PROSES PRODUKSI PROTOTYPE MOBIL LISTRIK LINGSAR PROTO 3 PADA KONTES MOBIL HEMAT ENERGI | en_US |
| dc.type | Thesis SKR FT 669 | en_US |
