Show simple item record

dc.contributor.advisorPRIHANDANA, GUNAWAN SETIA
dc.contributor.advisorSUNARDI
dc.contributor.authorANGGARA, TEGUH SMEDI BAYU
dc.contributor.authorANGGARA, TEGUH SMEDI BAYU
dc.date.accessioned2016-12-17T02:43:55Z
dc.date.available2016-12-17T02:43:55Z
dc.date.issued2016-08-26
dc.identifier.urihttp://repository.umy.ac.id/handle/123456789/7268
dc.descriptionPenyakit ginjal kronis (GKK) merupakan keadaan dimana ginjal sudah tidak berfungsi lagi dengan baik. Hal tersebut membuat sampah metabolisme dan air tidak dapat lagi dikeluarkan dari dalam tubuh, dalam keadaan tertentu sampah tersebut dapat meracuni tubuh dan menyebabkan kematian. sehingga penderita harus melakukan pencucian darah setiap minggunya menggunakan alat dialisis. Melihat latar belakang permasalahan tersebut, maka dikembangkan Wearable Artificial Kidney (WAK) berbasis microfilter menggunakan structural layers (plat tipis) yang terbuat dari material stainless steel SS316L berfungsi sebagai micro chamber (ruang mikro) dengan menggunakan membran semipermeabel sebagai media filtrasinya untuk menggantikan fungsi dari ginjal. Penelitian ini dilakukan untuk menentukan rasio perbandingan masing-masing bahan yang tepat untuk membuat membran yang memiliki nilai permeabilitas tinggi atau yang lebih di kenal water flux menggunakan metode phase inversion. Sedangkan bahan dasar pembuat membran menggunakan polyethersulfone (PES), polyethylene glycol (PEG) sebagai zat aditif dan N-Dimethylacetamide (DMAc) sebagai media pelarutnya. Media gelatinasinya menggunakan dua variasi yaitu akuades dengan penambahan NMP 2%, 4%, 6%, 8% dan akuades tanpa penambahan NMP. Dari hasil pengujian tes difusi didapatkan membran yang memiliki nilai permeabilitas tinggi di peroleh pada variasi media gelatinasi dengan penambahan N-Methy1-2-Pyrrolidone (NMP) 8% yang memiliki nilai water flux 871.8 (ml/m²/mmHg), Nilai koefisien difusi 0.07(mm²/s). sedangkan untuk nilai water contact angle berbanding terbalik yaitu sebesar 56º.Untuk nilai permeabilitas yang terendah di tunjukan pada membran dengan media gelatinasi NMP 4%, memiliki nilai water flux 186.8 (ml/m²/mmHg), koefisien difusi 0.06 (mm²/s) dan water contact angle 78º. Semakin permeabilitas tidaknya suatu membran erat hubungannya dengan morfologi membran tersebut seperti besar kecilnya diameter pori-pori yang terbentuk, keseragaman pori-pori, dan juga tebal dari membran itu sendiri.en_US
dc.description.abstractChronic Kidney Disease (CKD) is a condition where the kidney does not work well anymore. It makes the metabolic waste and water are no longer excluded from the body. In a certain condition, those waste can poison the body and cause a mortality. Therefore, the patient must do a hemodialysis every week by using dialyzer. Considering the background above, Gu and Miki have developed Wearable Artificial Kidney (WAK) based on micro filter by using structural layers that was made by stainless steel SS316L material served as micro chamber by using semipermeable membrane as the filtration media for replacing the function of kidney. This study was done to determine the ratio of each fabric membrane that had high permeability value or known as water flux by using phase inversion method. In addition, the basic material of the membrane was using Polyethersulfone (PES), Polyethylene glycol (PEG) as the addictive substances and N-Dimethylacetamide (DMAc) as the solvent media. The gelatinization media was using two variations such as akuades with the addition of 2%, 4%, 6%, 8% NMP and akuades without the addition of N-Methy1-2-Pyrrolidone (NMP). The diffusion test found the membrane that had a high permeability value were gained from the variation of gelatinization media with the addition of 8% NMP that had a water flux 871.8 (ml/m²/mmHg), diffusion coefficient value of 0.07(mm²/s). Moreover, the value of water contact angle was inversely by 56º. For the low permeability value was showed from the membrane with the gelatinization media of 4% NMP that had a water flux value 186.8 (ml/m²/mmHg), diffusion coefficient of 0.06 (mm²/s) and water contact angle of 78º. The more permeability a certain membrane is closely related to a membrane morphology like the diameter size of pores formed, pores uniformity, and the thickness of the membrane itself.en_US
dc.publisherFT UMYen_US
dc.subjectpolyether sulfone (PES), polyethylene glycol (PEG), N-Dimethylacetamide (DMAc), semipermeabel, gelatinization. polyether sulfone (PES), polyethylene glycol (PEG), N-Dimethylacetamide (DMAc), semipermeabel, gelatinasien_US
dc.titlePENGARUH MEDIA GELATINASI (PERENDAMAN) AIR TERHADAP NILAI PERMEABILITAS POLYETHERSULFONE (PES) DENGAN BERAT MOLEKUL 5900en_US
dc.typeThesis SKR 289en_US


Files in this item

Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record